![]() ![]() Unfortunately, identifying this device as a Grid+ is somewhat difficult. If your system doesn't have or use udev, just set the ownership and permissions on the device file manually and modify the GRID_DEV parameter in the control script. ![]() The best way to configure the device node on most modern systems is with a udev rule. Or, use a different group that makes sense to you. We use the group "staff" here to limit access, so make sure your user account is in the "staff" group. Shutting down fans on a system could cause it to overheat, so only the superuser/admin should be able to read or write to the device. The kernel module cdc_acm recognizes this as a serial ACM device, so you will probably see a new device node right away (/dev/ttyACM0). Mine shows up as a "04d8:00df Microchip Technology, Inc." device. Next you will want to confirm that the device is detected by Linux by tailing dmesg/journalctl.Ĭheck lsusb too. The white LED will light up only when both the power and USB are connected. If you are a developer interested in how gridfan or the Grid+ v2 works, please see the gridfan_dev_README.txt file.įirst, plug the controller into your system. Set your fan power/speed on a per-fan basis.Īutomatically adjust fan speeds based on sensors/temperature. Show you what your fan speeds are in RPM. Ping the controller to make sure it's alive. Gridfan is a simple controller script for the NZXT Grid+ v2 fan controller on GNU/Linux. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |